Pallet Conveyor
Built strong. Built to move more.
Our Pallet Chain Conveyor (PCC) Series is engineered for the safe, efficient transport of palletised loads up to 1,500 kg in the most demanding distribution centres, manufacturing facilities, and freight operations. Constructed with robust mild steel or aluminium frames and powered by premium SEW gear motors.
Heavy-duty construction
Built to handle heavy pallet loads — up to 1,500 kg per pallet.
High throughput
Engineered for high-throughput distribution centre operations.
Seamless integration
Easily integrates with your existing warehouse conveyor and automation systems, including ASRS and robotic cells.
Applications — designed for demanding industries
Our pallet conveyor modules are trusted by distribution centres, manufacturers, and freight operations for reliable, high-performance palletised load handling and transport.
- Distribution & warehousing
- Manufacturing
- Pallet handling & transport
- Freight & logistics
- Order fulfilment centres
- Robotic palletising & ASRS in-feed
Reliable pallet transport, every time
Our pallet conveyors are designed to move heavy palletised loads safely and efficiently — with minimal downtime and maximum throughput.
- Heavy-duty chain or roller options
- Suitable for all standard Australian pallet sizes
- Smooth transfer and accumulation
- Custom layouts to suit your project
- Available with transfers, lifts and positioning systems
- Safety features including guarding and sensors
- Integration with stretch wrappers and pallet DWS cubing machines
Technical specifications
Standard configurations are listed below. Chain centres, conveyor length and top-of-chain height are all built to suit your pallets and layout — the full datasheet covers chain types, frame construction and finishes.
| Pallet sizes | Standard Australian pallets (1165 × 1165 mm) — custom sizes available |
| Conveyor type | Chain driven / roller driven |
| Load capacity | Up to 1,500 kg per pallet |
| Conveyor speed | 8–30 m/min (variable speed available) |
| Drive system | SEW gear motor with chain / roller drive |
| Power supply | 415V / 3 phase / 50 Hz |
| Frame construction | Heavy-duty mild steel or aluminium, powder-coated |
| Bearings | NSK bearings, PE brackets |
| Operating temperature | 0°C to 40°C (standard) |
| Options | Transfers, pop-up stops, lifts, turntables, guarding |
* Specifications may vary based on application. Contact us for detailed information.
Chain or roller — which suits your pallets?
Chain driven
Drives the pallet’s bottom boards directly, so it handles timber and plastic pallets, IBCs and loads with uneven or damaged bases. The right choice for mixed or ageing pallet pools, and for in-feed and out-feed on palletisers and stretch wrappers.
Roller driven
Better where bases are flat and consistent — slave boards, plastic pallets or captive pallet pools. Runs quieter, and makes accumulation and zero-pressure buffering simpler to configure.
Transfers, turntables and lifts
Chain and roller sections combine with pop-up transfers, turntables and lift units to change direction, merge lines and feed machinery without manual handling. Most sites run chain through palletising and wrapping, then roller through accumulation and despatch.
Every module is designed and built at our Epping facility in Melbourne and installed across Australia. See the full conveyor range, or talk to us about integrating pallet handling with your fulfilment operation.
Frequently asked questions
How much weight can a pallet conveyor handle?
Our PCC Series carries up to 1,500 kg per pallet as standard, on a formed mild steel or aluminium chain profile mounted to a mild steel sub-frame. Heavier-duty builds are available on request.
Will it suit Australian Standard pallets?
Yes. The PCC Series is built to suit the Australian Standard pallet (1165 × 1165 × 150 mm) as standard. Euro, CHEP and custom footprints are all supported — chain centres are configurable from 500 mm to 1,100 mm.
How fast do pallet conveyors run?
Between 8 and 30 m/min depending on configuration, with variable speed drives available where throughput or gentle handling matters.
Can it integrate with our palletiser and stretch wrapper?
Yes. The series is designed for robotic palletising cells, stretch wrapping equipment and pallet DWS cubing machines, and is regularly used for machine in-feed and out-feed. Drives are SEW Euro Drive with NSK bearings as standard.
Where are your pallet conveyors made?
Designed and manufactured in Melbourne at our Epping facility, and installed across Australia.
Ready to explore automation?
Contact us today and speak with a member of our team.
