Most warehouses don’t plan to become manual. They start small, a few pallets and a packing bench, and handling cartons by hand works fine. Then volumes grow, the range widens, and the same process has to stretch further every year.
The tipping point rarely shows up as one big problem. It shows up as a handful of small ones that your team works around every day. If two or more of the signs below sound familiar, it is probably time to look at moving product mechanically rather than by hand. That means conveyor, mobile robots, and on most sites both working together.

1. More of your pick time goes to walking than picking
Watch a shift from above and count the trips. Pickers carrying cartons to packing, packers walking finished orders to dispatch, someone pushing a trolley back empty. Every one of those trips is paid time that adds nothing to the order.
Measure it before you assume. Pick a busy hour, walk a typical pick run yourself and time how much of it goes on travel rather than picking or packing. Where an operation has outgrown manual handling, the answer often lands somewhere between a quarter and a third of the shift.
Conveyor takes the carrying out of the job. Product comes to the person, and the person stays at the station doing the work you actually need done.
Walking tends to show up in two separate places, and each has its own fix. Product carried between fixed points, pick face to packing and packing through to dispatch, travels on conveyor, because that route never changes.
The walking inside the pick face is a different job. There the picker goes somewhere new for every order, so goods-to-person covers it: mobile robots bring the stock to a picker who stays at one station. Usually both kinds of walking are happening at the same time.
None of that is a headcount exercise. The same crew spends more of the shift picking and packing, and the site takes on more volume without adding people at the same rate.
2. You are missing carrier cut-offs
When the last truck leaves and orders are still sitting on the packing bench, the problem is usually flow, not effort. Manual handling moves in batches. Someone fills a trolley, walks it over, and the next station waits.
Batching also hides the real constraint. While product moves in trolley loads, every station looks busy, so it is hard to tell which one is actually setting the pace. The queue only becomes visible when the day runs out.
A conveyor line moves product continuously, so work arrives at each station at a steady rate. That makes your throughput predictable, and predictable throughput is what lets you commit to a cut-off and hit it.
3. The same carton gets handled again and again
Picked to a trolley, unloaded to a bench, packed, lifted to a pallet, wrapped, moved to the dock. Count how many times one order is touched between pick and dispatch. Each touch is a chance for a delay, a damaged carton or an order put in the wrong place.
Double handling is the easiest waste to miss because every individual movement looks reasonable. Nobody set out to handle a carton six times. It happened one workaround at a time, usually to solve a problem that no longer exists.
A well laid out line cuts the touches down to the ones that matter. Product is picked onto the conveyor, travels to packing, and travels on to dispatch without being set down in between.
4. Lifting and carrying is showing up in your injury reports
Repetitive lifting, twisting and carrying are among the most common causes of strain injuries in warehousing. If manual handling keeps coming up in your incident reports or toolbox talks, the process itself is part of the problem.
Training and technique help, but they are controls at the bottom of the hierarchy. Removing the lift altogether sits much higher. If a carton never has to be picked up off the floor or carried twenty metres, the risk is designed out rather than managed.
Conveyor at the right working height, with gravity or powered sections doing the moving, takes a lot of that load off your team. It is a practical way to reduce risk at the source rather than relying on training alone.
Goods-to-person helps for the same reason. The picker works at one bench at a set height with the tote or shelf presented to them, instead of reaching into racking at ankle height one minute and above shoulder height the next.
The people doing those lifts know where they happen and what makes them awkward, so bring them and your health and safety representative into the layout review while the drawing can still change.
5. You have run out of room to grow
More orders usually means more people, more trolleys and more floor space for staging. When aisles are clogged and product is parked wherever there is a gap, adding headcount stops helping.
This is often what triggers the conversation about a bigger building. Test that assumption first, because a lot of warehouses are not short of space so much as short of usable space, with a large share of the floor given over to staging and movement rather than storage or picking.
Conveyor uses space differently. It can run along walls, around racking, overhead or up to a mezzanine, freeing the floor for picking and storage. It can also be extended as volumes grow, so the system scales with you.
Robots add to that from the storage side. Because nobody has to walk into the racking, aisles can be narrower and storage can go much taller, so the same footprint holds considerably more. Where the constraint is cube as well as flow, the two work on the problem from different directions.


What staying manual actually costs
Put a number on the problem before you start looking at solutions, because the cost of manual handling is spread across several budgets and never appears as a line item.
Start with the walking. If a handful of pickers each spend a third of their shift moving product rather than picking it, you are paying for several hours a day of pure transport. Across a year that is weeks of walking that moves no product any closer to the customer.
Then add the parts that never get attributed to handling at all. The overtime when dispatch runs late. The extra labour hours you buy every peak to get one pinch point through. Stock damaged because cartons get set down on a concrete floor. A single strain injury that takes someone off the floor for weeks, with the excess and the premium loading behind it.
None of that shows up under a heading called manual handling. It shows up as labour cost, freight penalties and insurance, which is exactly why it goes unexamined for years at a time.
How conveyor and robots work together
A fulfilment operation is rarely one technology. Conveyor and mobile robots do different jobs inside the same system, and most of the sites we work on run them side by side.
Conveyor carries product along the routes that stay the same: pick face to packing, packing through to dispatch, and the accumulation that keeps a line fed without cartons pressing against one another. It is the circulation of the building.
Robots work where the route changes with every order. They bring the stock to a picker who stays in one place, which removes the walking and the searching together, and lets the storage behind them be built far denser.
Put together they cover the whole journey. Robots present the stock, the picker works at one bench, and conveyor takes the finished order away without anyone carrying it. The join between the two is where most of the gain shows up, so it pays to have one supplier responsible for both ends of it.
Where to start
Moving away from manual handling doesn’t have to mean automating the whole site at once. Many of our customers start with one problem area and build from there.
- Gravity roller conveyor is the simplest step. No power, low cost, and ideal for short runs, packing benches and loading areas. Product moves on a decline under its own weight, so there is nothing to wire in and nothing to service.
- Powered roller conveyor moves cartons and totes over longer runs, with zones that let product queue without pushing against each other. It is the backbone of most pick, pack and dispatch lines, and because each zone runs only when it carries product, it draws far less power than a single driven line.
- Belt conveyor suits small, soft or irregular items, and inclines where product needs to move between levels. A continuous belt supports the whole base, so polybags, sacks and anything that would fall between rollers travels safely.
- Pallet conveyor handles the heavy end: full pallets into and out of wrapping, palletising cells and dispatch, where a forklift movement would otherwise be required.
- Autonomous mobile robots (AMRs) bring the stock to the picker instead of sending the picker to the shelf. Through our partnership with Geek+ we supply tote-to-person, shelf-to-person and pallet-to-person systems, and integrate them with conveyor so finished orders leave the pick station without anyone carrying them.
The right mix depends on your products, your volumes and your building. That is why every system we design starts with your floor plan and how your orders actually flow.

Do you have to automate everything at once?
No, and most operations shouldn’t. A warehouse conveyor system is modular by nature. You can put a gravity run between pick and pack this year, add a powered line through to dispatch next year, and extend into a second zone when the volume justifies it.
Starting with one area also means you learn how your own operation responds before committing to a full line. The first stage almost always changes what you would specify for the second, and that is cheaper to discover on a short run than across an entire building.
How long does it take, and will it stop the operation?
Shorter runs go in over a weekend. Larger systems are installed zone by zone, with the existing process running alongside until each new section is proven, so there is rarely a day where nothing ships.
The planning takes longer than the installation, and it should. Getting the layout right covers where product enters, where it queues, where people stand and what happens when one station stops. That decides whether the system still suits you in three years or becomes the next workaround.
Talk to us about your site
Conveyor Logistics designs, manufactures and installs conveyor systems from our factory in Epping, Melbourne. We have been doing it for over 30 years, for warehouses, distribution centres and retail operations across Australia, from concept to completion. We also act as systems integrator where a project takes in robotics, storage or packing automation alongside the conveyor.
If two or more of these signs sound familiar, send us your floor plan and a quick outline of your volumes. We will show you where conveyor could take the walking, lifting and double handling out of your operation. And we will tell you if it is not the answer.
Common questions
What is a warehouse conveyor system?
A set of connected conveyor modules that move product between the stages of an order (picking, packing and dispatch) without anyone carrying it. Most systems combine types: gravity where product can run under its own weight, powered roller for longer transport and accumulation, belt where the product will not sit on rollers.
How much does a conveyor system cost?
It depends far more on layout than on length. A short gravity run between two benches is a modest spend with no power or controls. A powered line with zone control, diverts and integration into your software is a different scale of project. The useful first step is a floor plan and your volumes, which is enough to put a realistic range around it.
Will it work with our existing racking and software?
Usually, yes. Conveyor is normally built around existing racking and benches rather than replacing them, and the control layer can be integrated with your WMS or host system so releases, routing and status reporting are driven by the software you already run.
What is the difference between gravity and powered conveyor?
Gravity has no motor. Product moves on a decline under its own weight, which makes it cheap, quiet and needing next to no maintenance, but it needs fall and it will not accumulate in a controlled way. Powered roller conveyor drives each zone independently, so product can queue without pressure and travel on the level or uphill. Most sites use both, with gravity doing the work that does not need paying for.
How do conveyor and robots fit together?
They cover different parts of the same journey. Robots bring stock to the pick station, where the route changes with every order. Conveyor carries the finished work along the routes that stay the same. On most sites the two are specified together, with robots feeding the stations and conveyor taking the output through packing to dispatch.

